L'alluminio elettroforetico è l'ossido di alluminio come anodo, posto in una soluzione di emulsione solubile in acqua{0}}, attraverso la corrente continua, depositato artificialmente sulla superficie dello strato protettivo della pellicola di rivestimento di ossido di alluminio per formare alluminio elettroforetico.
Caratteristiche principali dell'alluminio elettroforetico di-alto grado:
1. Ha una forte durezza del film di vernice.
2, con pellicola ad alta adesione, non facile da staccare dall'invecchiamento.
3. Ha una maggiore resistenza agli agenti atmosferici e agli alcali rispetto all'ossido di alluminio.
4, il colore della superficie è ricco, bello, con effetto specchio-come lucentezza.
I profili elettroforetici sono più adatti per l'uso all'aperto, lo standard nazionale 70 anni di resistenza agli agenti atmosferici di base uccide altri trattamenti superficiali.
Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.
Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:
1 esperimento di processo di solidificazione
180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.
2 esperimento di viscosità del film protettivo ed acqua nebulizzata
There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.
3. Problemi con la soluzione del serbatoio dell'elettroforesi
Quanto sopra è solo dall'analisi dei risultati, ma il modo di affrontare il problema in un'altra fabbrica fa riconoscere all'autore la direzione del problema fondamentale.
It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.
Quanto segue è solo un'inferenza. L'attrezzatura di proprietà dell'autore non può supportare la verifica al momento.
In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.
Lo squilibrio del solvente può danneggiare la compattezza e l'uniformità del film di vernice e causare l'ingresso di acqua nel film di vernice, con conseguente formazione di filigrana.
Riassumi i tre punti precedenti, spero che casi simili possano essere confrontati per trovare il problema.




